Ordinary earphones can also be used for playing games, but they are not as professional as game earphones. After all, for games like PUBG, earphones are required to clearly hear many small sounds in the game scene, such as "footsteps", so that players can know the position of each other.

Therefore, the immersive effect of the game headset is much better than normal headphones, focusing on the arena and exciting experience.

Purchase points of game headset

🚩Horn unit size

The diameter of the horn unit is 40mm, there are smaller than this, such as 30mm, look very delicate and compact. There are also larger earmuffs, 50mm and 60mm, which are typically used on competition-level gaming headsets.

🚩Sound quality

It mainly focuses on sound effects and sound field localization. When playing some MOBA games, it is often used to locate the sound field. It is necessary to observe the movements of the opponent in time and get ready in time. Although the sound effect is not as comprehensive as the music headset, but in the sound control is very sensitive, can balance the control of audio signals of different frequencies, in the sound channel combination can form an immersive shock effect.

🚩Frequency response range

The frequency response range is the range of signals that the human ear can receive.

Relevant data point out that human can hear the signal range is 20Hz-20kHz, beyond which they can not hear. In the market to see a lot of manufacturers of the range is wider than this, but in fact advertising is not very important (can see that the manufacturers pay attention to the sound signal analysis and playback investment), after all, can hear on the line, so good at whether in the ear to receive the range can be.

🚩Impedance

Impedance is an expression that hinders the current. It generally depends on what the dynamic coil combination of the loudspeaker is. After all, this loudspeaker uses the principle of electromagnetic induction.

The greater the current, the greater the magnetic field strength, and the better the sound production effect. Therefore, the smaller the impedance, the better the sound production effect; The greater the impedance, the worse the sound production effect and the heavier the bass.

For a balanced value, 32 ohms is very suitable, and a smaller value (16 ohms) is also very effective.

Sensitivity, the change in sound per milliwatt of power, describes the ability to respond in time to the transformation of an electrical signal into an acoustic signal.

The higher the sensitivity, the lower the latency, the better the sound parsing, and the easier it is to notice changes in vocalization in the game. A common SPL is 60-110 dB, so buy in this range.

Moving coil and moving iron are relatively common physical unit designs. From the cost, moving coil cost is low, moving iron is high. In principle, the moving coil is formed by the magnetic field generated by the current to promote the vibration of the diaphragm.

Moving iron is the permanent magnet field formed by the connection between the magnetic rod and the vibration film. The electrified wire and the magnet are transmitted to the magnetic film through the magnetic rod to promote its vibration. However, the process is complex, the precision and the sealing degree are very high.

From the purpose, the former is used in the affordable game headset, the latter is used in the medium and above game headset, compared with the balance effect of moving iron is better. There is also a ring iron design on the market, that is, the combination of the two, complementary advantages, this is used in the upper price headphones.

🚩Material

The material is related to comfort in the wearing process, to consider the air permeability, softness and elasticity. If the air is not ventilated, it is easy to ear swell and uncomfortable, and it is easy to have a headache. Therefore, the material of the head beam and the ear mask position is particularly important, so that the environmental pressure of playing games on the ear nerve can be greatly improved and playing games can be more enjoyable.

Generally on the market are sponge (memory cotton, ordinary sponge) + leather (ordinary leather, imitation leather or leather) this material. Material is linked with the price, there is a higher budget to choose leather + memory cotton material.

Conclusion

If you are looking for wireless earbuds Bluetooth 5.0 headsets producer china, we hope we will be your best choice.